Dell S320 User Manual page 59

3D F
Side By Side Full, Frame Sequential, Field Sequential, Top/Bottom, and
Top/Bottom Full.
D
ISPLAY
The display settings menu provides the following options:
A
appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of image projector
according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
Z
3D D
Downloaded From projector-manual.com DELL Manuals
—Allows you to select the 3D format. Options are: Side By Side,
ORMAT
3D S I —If you see a discrete or overlapping image while
YNC NVERT
wearing DLP 3D goggles, you may need to execute 'Invert' to get best
match of left/right image sequence to get the correct image. (For DLP
3D goggles)
S ( V M
ETTINGS IN IDEO
R —Allows you to select the aspect ratio to adjust how the image
SPECT ATIO
—Press and
OOM
—Select On to start the 3D display function (default is Off).
ISPLAY
NOTE:
1. When you want to create a 3D experience, you will need a few other
components including:
)—Select and press
ODE
to zoom and view the image.
Adjust the image scale by pressing
and press
only.
Z N —Press
OOM AVIGATION
Navigation menu.
Use
to activate display settings.
to view on your remote control
to activate the Zoom
to navigate the projection screen.
Using Your Projector
or
59