Dell S320 User Manual page 36

4 TEMP warning light
5
Enter
6
IR Receiver
7
Right
8 Down
adjustment
9
Left
10 Menu
36 Using Your Projector
Downloaded From projector-manual.com DELL Manuals
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 126 and "Guiding Signals" on
page 132.
Press to confirm the selection item.
Point the remote control towards the IR receiver
and press a button.
/ Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
/ Keystone Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+37/-40 degrees).
/ Source Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.