Panasonic BT-LH900A Operating Instructions Manual page 21

MAIN MENU
(continued)
INPUT SELECT
Item Setting
SDI1 * OFF For setting whether the SDI 1 signals can
1
ON be selected when the channels are to be
switched using the INPUT button.
OFF: The SDI 1 signals cannot be selected.
ON: The SDI 1 signals can be selected.
FORMAT AUTO For selecting the signals whose input is to
1080/60I be accepted at the SDI 1 connector.
1080/50I AUTO:
1080/30P
1080/25P 1080/60I:
1080/24P
1080/24PsF
1035/60I 1080/50I:
720/60P
720/60P 1080/30P:
ANAMO
720/50P
576/50I 1080/25P:
480/60I
1080/24P:
1080/24PsF:
1035/60I:
720/60P:
720/60P ANAMO:
720/50P:
576/50I:
480/60I:
The underlined setting indicates the factory setting mode.
Description
All supported signals are accepted.
1080/60I or 1080/59.94I format signals
are accepted.
1080/50I format signals are accepted.
1080/30P or 1080/29.97P format signals
are accepted.
1080/25P format signals are accepted.
1080/24P or 1080/23.98P format signals
are accepted.
1080/24PsF or 1080/23.98PsF format
signals are accepted.
1035/60I or 1035/59.94I format signals
are accepted.
720/60P or 720/59.94P format signals
are accepted.
720/60P or 720/59.94P format signals
which support an anamorphic lens are
accepted.
720/50P format signals are accepted.
576/50I format signals are accepted.
480/59.94I format signals are accepted.
Item Setting
SDI2 * OFF For setting whether the SDI 2 signals can
1
ON be selected when the channels are to be
switched using the INPUT button.
OFF: The SDI 2 signals cannot be selected.
ON: The SDI 2 signals can be selected.
FORMAT AUTO For selecting the signals whose input is to
1080/60I be accepted at the SDI 2 connector.
1080/50I The setting selection is the same as for the
1080/30P SDI 1 FORMAT item.
1080/25P
1080/24P
1080/24PsF
1035/60I
720/60P
720/60P
ANAMO
720/50P
576/50I
480/60I
VIDEO * 1 OFF For setting whether the VIDEO signals can
ON be selected when the channels are to be
switched using the INPUT button.
OFF: The VIDEO signals cannot be selected.
ON: The VIDEO signals can be selected.
FORMAT AUTO For selecting the signals whose input is to
NTSC be accepted at the VIDEO connector.
PAL AUTO:
NTSC:
PAL:
YPBPR * 1 OFF For setting whether the YP
ON can be selected when the channels are to
be switched using the INPUT button.
OFF: The YP
ON: The YP
MODE YPBPR For switching between the YP
RGB analog signals.
YPBPR:
RGB:
*1 Up to three of these items can be set to OFF at the same time. Once the
three items have been set to OFF, it is no longer possible to set a fourth
item to OFF. It is not possible to set all the inputs to OFF.
Description
All supported signals are accepted.
NTSC signals are accepted.
PAL signals are accepted.
P /RGB signals
B R
P /RGB signals cannot be
B R
selected.
P /RGB signals can be
B R
selected.
P and RGB
B R
The analog signals are switched to
Y/P /P .
B R
The analog signals are switched to RGB.
21