4
3
5
4
3
5
<Auto cutter type>
2.
1
2-1. Tear bar type
(1)
(2)
(3)
<Tear bar type>
2-2. Auto cutter type
1
(1)
(2)
2
(3)
– 9 –
Printer Mechanism
Turn off the power switch, disconnect the power cord
from the wall outlet.
Remove the case unit according to the procedure
described in item 1.
Caution:
Handle the FEED switch 5 carefully as described in the
cautions of item 1.
Remove
• Two screws 1
• Flat cable 3
• Printer mechanism 4
Turn off the power switch, disconnect the power cord
from the wall outlet.
Remove the case unit according to the procedure
described in item 1.
Caution:
Handle the FEED switch 5 carefully as described in the
cautions of item 1.
Remove
• Two screws 1
• Connector 2
• Flat cable 3
• Printer mechanism 4