Power And Sound Controls - Panasonic CQ-4300U Operating Instructions Manual

Power and Sound Controls

BASS/FAD
BAL/FADER
d
BASS/FAD
BAL/FADER
d
BASS/FAD
BAL/FADER
Power
If the vehicle is not running yet, turn the key in the ignition until the
accessory indicator lights.
Press [PWR] to switch on the power.
Volume
Press the knob to select the volume mode and then turn it
clockwise or counterclockwise to adjust the volume level.
Anti-Volume-Blast Circuit
At power on, the volume returns to the previous level slowly if
the level was at 20 or higher.
Changing Audio Modes
Press this knob [SEL] to change the audio mode as follows.
(Volume)
Bass and Treble
Press the knob to select the BASS or TREBLE mode and then turn
it clockwise or counterclockwise to increase or decrease the
bass/ treble level.
Balance
Press the knob to select the BALANCE mode and then turn it
clockwise or counterclockwise to shift the sound volume to the right
or left speakers.
(R: Right, L: Left)
0 to 40
VOL BASS
a
c
FADE
b
(Fader)
-12 to 12
or L 1 to 15
l
k
FEW 4500U
Volume Level
TRE
a
(Treble)
d
BAL
(Balance)
-12 to 12
Balance Center
4