Panasonic CQ-4300U Operating Instructions Manual page 11

d
FEW
or
FEW
Notes:
To maintain your cassette player in top condition, avoid using tapes that are longer than 90
minutes (C-90).
If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a
finger or the like, the cassette may not be properly reproduced. In such a case, eject the cassette,
make the tape tight, then insert it back into the deck.
11
TPS Operation (Tape Program
Search)
l
Ex1. To select the current program
k
4500U
Ex2. To
l
Ex3. To select the next program,
k
4500U
Ex4. To select the 3rd next
Notes: The TPS mode may not work correctly in the following
cases. This, however, does not mean that the unit is defective.
There is an interval of less than 4 seconds or having a high level
of noise or hum between programs.
There is particularly low-level passage during the program.
Press [3 TPS] to activate the tape program search mode.
To select a desired program, press [ i
times to go backward (up to 8) or forward (up to 9).
(Rewind:)
8 0
c
again, press [3 TPS], and
press [ i i ].
select the
program, press [3 TPS], and
press [ i i ] twice.
press [3 TPS] and press [ j
program , press [3 TPS], and
press [ j j ] three times.
Press [3 TPS] again to cancel.
i ] or [ j
(Fast forward:)
1 9
c
previous
j ].
j ] corresponding