Panasonic CQ-4300U Operating Instructions Manual page 23

Installation Guide
Installation Procedures
When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure
your hands and fingers.
We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
Note: Disconnect the cable from the negative (–) battery terminal.
1. Secure the Mounting Collar
Insert Mounting Collar
screwdriver.
Dashboard
1 Mounting Collar
2. Securre the rear of the unit.
a) Insert Power Connector
b) Check the electrical connection by referring to this operating instructions.
c) Insert the unit into Mounting Collar
d) Secure the rear of the unit to the vehicle by either of the two recommended methods on the next
page.
23
.
into the vehicle's dashboard, and bend mounting tabs out with a
to the unit.
and push it in until "click" is heard.
8 Power Connector
(continued)
Mounting Tab
Screwdriver
Unit