Power And Sound Controls - Panasonic CQ-RD132N Operating Instructions Manual

Power and Sound Controls

Power
Turn the key in the ignition until the accessory indicator lights.
Power on : Press [PWR] .
Power off : Press [PWR] again.
Note: When the power is switched off and on again, the volume slowly rises to the
previous level.(at the volume level is more than level 20)
Volume
[}VOL] : Up
[{VOL] : Down
Press and hold for rapid adjustment.
Mute
Press [MUTE] to mute the sound completely.
Press [MUTE] again to cancel.
Audio Mode (Volume/Bass/Treble/Balance/Fader)
Press [SEL] to select the audio mode. Press [}VOL] or [{VOL] to change each level.
Regular Mode
Volume
Bass
Treble
Balance
Fader
Note: If no operation takes place for more than 5 seconds in the audio mode (2 seconds in Volume mode), the display
returns to Regular Mode.
Volume Level (0 to 40)
TUNE
VOL VOL
CQ-RD152N
CD-C BAND
SEL SEL
APM
TRACK
1
MUTE MUTE
(0 to 40)
(–12 to +12)
(–12 to +12)
(Left / Right: 1 to 15) (
(Front / Rear: 1 to 15) (
CASSETTE RECEIVER
SCAN REPEAT
2 3 4 5
PTY
Loudness
Press and hold [MUTE](LOUD) for more than 2
seconds to enhance bass and treble tones at low or
medium volume.
Press and hold [MUTE](LOUD) again to cancel.
CQ-RD152/RD142/RD132N
PRG
TA
PWR
PWR
AF
EON E PTY E C T
REG
DISP
(center) )
(center) )
E
N
G
L
I
S
H
2
7