Audio Settings - Panasonic C1305L Operating Instructions Manual

Audio Settings

[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to select)
selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
1
Press [VOL] (PUSH SEL) to display the audio menu display.
Note: If no operation takes place for more than 5 seconds in the audio menu (2 seconds in Main volume adjustment),
the display returns to the regular mode.
2
Press [VOL] (PUSH SEL) to select a
mode to be adjusted.
(Setting Range: 0 to 40, Default: 18)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(Setting Range: 15 levels each, Default CNT (center))
(Setting Range: 15 levels each, Default CNT (center))
Notes:
• If the fader is set to front, the pre-amp. output (rear) is decreased.
• For further information on SQ (Sound Quality) settings, refer to General.
•
Settings of SQ, bass and treble are infl uenced one another. If such an infl uence causes distortion to the audio signal, readjust bass/treble or volume.
Volume
Bass
Treble
Balance
Fader
3
Turn [VOL] clockwise or counterclockwise
to adjust.
: Up
: Down
: Increased
: Decreased
: Increased
: Decreased
: Right enhanced
: Left enhanced
: Front enhanced
: Rear enhanced