Panasonic C1305L Operating Instructions Manual page 14

Band Frequency
lights while receiving an FM stereo signal.
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing [1] to [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions
can be automatically stored in the preset memory.
1
Select a band.
2
Hold down [BAND] (APM) for more than
2 seconds.
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
(SCAN). To stop scanning, press one of the buttons from
[1] to [6].
Note: New stations overwrite existing saved stations.
Preset Number
Display change
Press [DISP] to change the display.
Radio mode display (Default)
Manual station preset
1
2
Note: New stations overwrite existing saved stations.
Tune into a station.
Hold down one of the preset buttons from
[1] to [6] for more than 2 seconds.
(blinks once)
Clock display