Table of Contents
Advertisement
●
Changing Camera Information
You can change the contents of the registered information for cameras in the camera registration
information list.
Attention
• If multiple selections are made for registration information of a network camera to be changed, the "Change"
button will be disabled.
1. Select "Camera Registration".
A screen displaying a list of the camera registration information appears.
2. Check the number of the camera to be changed.
3. Select "Change".
A "Camera Information Settings" dialog box appears.
Note
• When a registered camera is selected, a dialog box describing the applicable camera information
appears. When an unregistered display position is selected, a dialog box with "Panasonic" selected in the
"Protocol" item appears.
Item
Camera Name
IP Address
Detail
Can use alphanumeric characters, kana and kanji 0 to 24 characters
If a new camera, leave blank
0.0.0.0 to 255.255.255.255
Chapter 3 Configuring from a Web Browser
Setting range
45
Advertisement
Table of Contents
Troubleshooting
