Setting Unit Price For Selling Energy - Mitsubishi Electric PV-PNS04ATL-GER Operation Manual

5.3.5 Setting Unit Price for Selling Energy

Display panel
SETUP
UN I T PR I CE
1
SETUP UN I T
0 3 . 4EUR￠ / kWh 4
2
Flashing
SETUP UN I T
0 3 . 4EUR￠ / kWh 4
Flashing
3
SETUP UN I T
0 3 . 4EUR￠ / kWh 5
Flashing
SETUP
UN I T PR I CE
4
1. Press the MODE switch several
times until the "SETUP" mode is
displayed.
2. Press the SELECT switch several
times to enter "Unit PRICE" mode.
・"UNIT PRICE" is displayed on the
lower row of the LCD.
Press the ENTER switch.
・Your PV inverter is now ready for
PR I CE
setting a unit price. The section in
which you can set a unit price starts
flashing.
1. Pressing the MODE switch causes
the next (or right-hand side) digit to
PR I CE
start flashing.
2. Each push of the SELECT switch
changes the flashing number:
PR I C E
→ 1 → 2 → ...9 → 0
Repeat the procedure to bring up the
desired number.
Press the ENTER switch to register
the set price.
(The PV inverter reverts to step 1
above.)
75
Procedure
pp.1-48
pp.1-48
pp.1-48