Panasonic WV-NP244 Operating Instructions Manual page 9

Otherwise, the camera may not work
properly or performance deterioration
may be caused.
• Images saved on the SD memory card
may lead to personal information leak-
age. When it is necessary to give the
camera to someone, even when for
repair, make sure the SD memory card is
removed from the camera.
• There are limited times to overwrite on an
SD memory card.
It is recommended to replace the SD
memory card when having a periodic
maintenance of the camera.
Do not aim the camera at strong light
sources.
A light source such as a spot light causes
a blooming (light bleeding) or a smear
(vertical lines).
Smear
Blooming
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Broadband router
When it is necessary to use a broadband
router to connect the camera to the Internet,
use a broadband router with the port for-
warding function (NAT, IP masquerade).
Refer to the Operating Instructions (PDF) for
further information about the port forwarding
function.
Blight subject
Radio disturbance
When the camera is used near TV/radio
antenna, strong electric field or magnetic
field (near a motor or a transformer), images
may be distorted and noise sound may be
produced.
Do not install the camera in a humid or
dust-laden environment.
Otherwise, lifetime of the internal parts may
be shortened.
9