using the video light
Brightening up dark scenes for recording
The built-in video light can be used when the subject is in dark surroundings.
1
Set to [
] or [ ].
Each time
is pressed, the icon changes as shown below.
Permanently ON
●
The light automatically turns off at the following times:
•
When the mode dial is set to [ ] or [ ]
•
When a computer is connected to the unit
During quick start standby (P.25)
•
●
In Demo Mode (P.92), the light automatically turns on.
●
Set the video light to off in locations where the use of a video light is prohibited
or when the auto video light cannot be deactivated under sufficient light
conditions.
2
Turns ON or OFF
automatically depending
on the brightness of the
surroundings.
●
In Intelligent Auto Mode,
the light turns on when
] appears.
[
Press
.
[LIGHT] icon displayed
(No icon displayed)
OFF
41
41
LSQT1426
LSQT1426