Table of Contents
Advertisement
Problem
The SD card is not
recognized when
inserted into other
devices.
The computer does
not recognize the
unit even when
connected with USB
cable.
After disconnecting
the USB cable,
an error message
appears on the
computer.
[ERROR
OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN
ON AGAIN.] appears
on the LCD monitor.
The audio does not
output for a motion
picture copied with
a DVD burner.
Check the supported SD cards in the device's
operating instructions.
●
While the menu appears on the LCD monitor, the
USB function screen does not appear even if the
USB cable is connected. Close the menu, then
connect the USB cable.
●
Is the AC adaptor connected?
●
If the computer has multiple USB terminals, try using
another terminal.
●
Check the operating environment. (P.78)
●
Disconnect the USB cable, shut the power off and
turn back on, then reconnect the cable.
●
For Windows
To safely disconnect the USB cable, click the (
or
) icons in the task tray, and do as instructed by
displayed messages.
●
For Macintosh
Drag the unit icon to the Trash, then disconnect the
USB cable.
●
The unit detected an error. To protect data, eject
the SD card and set the mode dial to [OFF]. Power
shuts off about 1 minute later.
●
If the same message is displayed repeatedly after
turning power back on, the unit needs servicing.
Disconnect the power supply and consult the dealer
from whom you purchased the unit. Do not attempt
to repair the appliance by yourself.
If [AUDIO REC] (P.92) is set to [MPEG] for recording,
audio may not be output with some playback devices.
Set to [DOLBY] when recording.
What to check
101
LSQT1426
Advertisement
Table of Contents
