Connecting To A Pc - Panasonic SDR-H85P/PC Operating Instructions Manual

With a PC
2
Setup
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
≥ It is possible to use the unit connected to
the PC with the batteries only, but you will
not be able to write data into the unit.
≥ Use the AC adapter to free you from
worrying about the battery running down.
2
Turn on the unit.
≥ This function is available in all modes.
≥ When using the battery, the LCD monitor
will be turned off after about 5 seconds.
Operating the joystick will cause the LCD
monitor to turn on again.
3
Connect this unit to a PC.
≥ Insert the USB connectors as far as they
will go.
≥ Do not use any other USB cables except
the supplied one. (Operation is not
guaranteed with any other USB cables.)
≥ The Smart wizard screen is automatically
displayed when VideoCam Suite 3.0 is
installed.
≥ This unit is automatically recognized as an
external drive of the PC. (l 96)
≥ A USB function selection screen will be
displayed if VideoCam Suite 3.0 has not
been installed. Use the joystick to select
[PC], then press the center of the
joystick.When you select an option other
than [PC], reconnect the USB cable.
94
VQT2L14

Connecting to a PC

≥ When Windows is used as the PC
operating system, a message prompting
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
≥ When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before
turning this unit off.
≥ Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
card access icon (
unit screen.
≥
SDR-T55
Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
built-in memory access icon (
appears on the unit screen.
≥
SDR-H85
Do not disconnect the USB cable or the
AC adaptor while the HDD access lamp is
on or HDD access icon (
the unit screen.
≥ When performing reading/writing between a
PC and an SD card, be aware that some SD
card slots built into PCs and some SD card
readers are not compatible with the SDHC
memory card or SDXC memory card.
) appears on the
SDR-T50
/
)
) appears on