Charging The Battery; Vqt2L14 - Panasonic SDR-H85P/PC Operating Instructions Manual

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before
using this unit for the first time.
≥ The battery will not be charged if the power is turned on.
1
Connect the AC adaptor to this unit's DC input terminal.
2
Connect the AC cable to the AC adaptor, then the AC outlet.
≥ For the AC cable, plug in 2 and then 3.
≥ The status indicator will flash red at an interval of 2 seconds, indicating that charging has begun.
∫ Connecting to the AC outlet
If you turn on this unit while charging the battery using the AC adaptor, you can use the
power supplied from the AC outlet to power the unit for use.
≥ Refer to page 113 when status indicator flashes either rapidly or slowly.
≥ We recommend using Panasonic batteries (l 12, 21, 120).
≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
20

VQT2L14


