Lcd Monitor - Panasonic SDR-H85P/PC Operating Instructions Manual

≥
To physically format an SD
SDR-S50
card, connect the unit via the AC adaptor,
select [FORMAT CARD] from the menu,
and then press and hold the delete button
on the screen below for about 3 seconds.
When an SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
≥
/
SDR-T55 SDR-T50
SDR-H85
To physically format an SD
card, connect the unit via the AC adaptor,
select [FORMAT MEDIA] # [SD CARD]
from the menu, and then press and hold
the delete button on the screen below for
about 3 seconds. When an SD card data
deletion screen appears, select [YES],
and then follow the on-screen instructions.
≥ Please look after the data in an SD card
carefully.
114
VQT2L14
≥ When the LCD monitor gets dirty, wipe it
≥ In a place with drastic temperature
≥ When the unit has become very cold, for
/

LCD monitor

with a soft cloth such as eye glass cleaner.
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth such
as eye glass cleaner.
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the power is
turned on. The normal brightness will be
restored when the unit's internal
temperature rises.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
123,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.