Table of Contents
Advertisement
7.5 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your VMG.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See
Note: The VMG applies the security settings of the SSID1 profile (see
page
mode of SSID1 to WPA2-PSK or No Security.
Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click
Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 40 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 24 Network Setting > Wireless > WPS
LABEL
General
WPS
Add a new device with WPS Method
Method 1
WPS
Method 2
Chapter 7 Wireless
Section 7.9.8.3 on page 111
88). If you want to use the WPS feature, make sure you have set the security
DESCRIPTION
Select Enable to activate WPS on this VMG.
Use this section to set up a WPS wireless network using Push Button Configuration (PBC).
Select Enable and click Apply to activate WPS method 1 on the VMG.
Click this button to add another WPS-enabled wireless device (within wireless range of the
VMG) to your wireless network. This button may either be a physical button on the outside
of device, or a menu button similar to the WPS button on this screen.
Note: You must press the other wireless device's WPS button within two minutes of pressing
this button.
Use this section to set up a WPS wireless network by entering the PIN of the client into the
VMG. Select Enable and click Apply to activate WPS method 2 on the VMG.
VMG1312-Bx0D User's Guide
for more information about WPS.
98
Section 7.2 on
Advertisement
Table of Contents
