Daikin FWG05AATNMV1 Installation Manual page 10

10. Wires Installation
Figure A and Figure B shows the location of cover wire in indoor unit.
Steps to install power supply wires and wires from outdoor unit.
1. Remove wire cover by removing screws as shown in Figure C.
2. Wires will go through the hole as shown in Figure D and E respectively without crossing the height of the hole.
3. After that, wire cover will be assembled back to close the wire.
1 IM-CKEW(DC)-1013(1)DAIKIN-EN.i8 8 1 IM-CKEW(DC)-1013(1)DAIKIN-EN.i8 8
Figure B
Figure D
Figure A
1-8
Figure C
Figure E
7/1/14 2:39:06 PM 7/1/14 2:39:06 PM