Table of Contents
Advertisement
Charging time and recordable time
The times shown in the tables below are for when
the temperature is 25 oC (77 oF) and the humidity
is 60%. If the temperature is higher or lower than
25 oC (77 oF), the charging time will become
longer.
A
CGR-DU06
(7.2 V/
B
640 mAh)
CGA-DU12
A
(7.2 V/
B
1150 mAh)
A
Supplied
battery/
B
CGA-DU14
(7.2 V/
1360 mAh)
CGA-DU21
A
(7.2 V/
B
2040 mAh)
A Charging time
B Maximum continuously recordable time
"1 h 40 min" indicates 1 hour 40 minutes.
≥The battery CGA-DU14 is supplied.
≥The charging time and recordable time shown in
the table are approximations. The times indicate
the recordable time when the viewfinder is used.
The times in parentheses indicate the
recordable time when the LCD monitor is used.
≥We recommend the Battery Pack CGA-DU14
and CGA-DU21 for long recording time (2 hours
or more for continuous recording, 1 hour or
more for intermittent recording).
≥The recordable time will become shorter in the
following cases:
≥When you use both the viewfinder and the
LCD monitor simultaneously while rotating
the LCD monitor frontward to record yourself,
using the 0 Lux MagicPix function, etc.
≥When you use this Camcorder with the LCD
monitor lit up by pressing the [POWER LCD]
button.
≥When you use accessories fitted on the
Camcorder's smart accessory shoe such as
the stereo zoom microphone and video DC
light, etc.
≥The batteries heat up after use or charging. The
main unit of the Camcorder being used will also
heat up. This is normal.
≥Along with the reduction of the battery capacity,
the display will change:
#
#
discharges, then
Before using
1 h 40 min
1 h 5 min
(1 h)
2 h 25 min
1 h 55 min
(1 h 50 min)
2 h 45 min
2 h 10 min
(2 h 10 min)
3 h 55 min
3 h 15 min
(3 h 15 min)
#
#
. If the battery
(
) will flash.
Turning the Camcorder on
When the Camcorder is turned on with the lens
cap fitted, the automatic white balance
adjustment (
) may not function properly.
-83-
Please turn the Camcorder on after removing the
lens cap.
ª
How to turn on the power
1
While pressing the button 1, set the
[OFF/ON] switch to [ON].
≥The Status indicator lights red and the power
turns on.
≥In Tape Recording Mode or Card Recording
Mode, if the [OFF/ON] switch is set to [ON]
while the LCD monitor is closed and the
viewfinder is retracted, the power turns off.
ª
How to turn off the power
1
While pressing the button 1, set the
[OFF/ON] switch to [OFF].
≥Set the [OFF/ON] switch to [OFF] when not
using the Camcorder.
≥The Status indicator goes off when the power
turns off.
1
1
17
LSQT0975
Hide quick links:
Advertisement
Table of Contents
