Table of Contents
Advertisement
(36)
Shoulder strap fixture
This is a fixture for attaching the shoulder strap to
hang the Camcorder from your neck or shoulder.
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 2 cm (1 inch).
≥Fit the other end of the belt similarly.
1
(37)
(37)
Lens hood
In order to remove the lens hood, rotate it
counter-clockwise 1. In order to fit it, place into
slot 2, and then rotate it clockwise.
(38)
Smart accessory shoe
The stereo zoom microphone /VW-VMH3
(optional) or the video DC light/VW-LDH3
(optional) should be mounted here.
≥When an accessory is attached to the smart
accessory shoe, the power required to operate
the accessory is supplied by the Camcorder.
≥When mounting or removing the accessory,
extend the viewfinder (1).
14
LSQT0975
Before using
(36)
1
3
2
2
(38)
1
Attaching the lens cap
Fit the lens cap to protect the surface of the lens.
1
Push the string through the belt. Push the
lens cap through the loop in the string.
≥To fit or remove the lens cap, hold both sides of
the lens cap with the tips of your finger and
thumb.
≥The lens cap removed can be attached to the
lens cap fixture. (It cannot be hung if the grip
belt is used as a hand strap.)
Hide quick links:
Advertisement
Table of Contents
