Table of Contents
Advertisement
The one-touch free-style grip belt
ª
To use as a grip belt
Adjust the belt length so it fits your hand.
1
Adjust the belt length and the pad position.
2
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
ª
To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this Camcorder more easily.
1
Flip the belt.
2
1 Flip the belt.
2 Adjust the length.
2
Put your hand through the strap.
≥Use the Magic Wire Remote Control for more
convenience.
≥Hold the Camcorder without covering the
microphones or sensors with your hands.
Before using
Power supply
ª
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time (
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC Cable is connected to the AC adaptor,
then the battery will not get charged. Remove
3
the DC Cable from the AC adaptor.
1
1
2
ª
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
1
Charging the battery
Connect the AC Cable to the AC adaptor
and the AC Jack.
Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
Charging lamp
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
)
-17-
15
LSQT0975
Hide quick links:
Advertisement
Table of Contents
