ZyXEL Communications ARMOR Z1 NBG6816 User Manual page 41

Table 17 Expert Mode: Navigation Panel: Router Mode (continued)
LINK TAB
General
Password
Time
Firmware
Upgrade
Backup/Restore
Restart
Language
Remote Remote
Management Access
Wake On LAN
Log
Operation Mode
Chapter 6 Router Mode
FUNCTION
Use this screen to view and change administrative settings such as system
and domain names.
Use this screen to change the password of your ARMOR Z1.
Use this screen to change your ARMOR Z1's time and date.
Use this screen to upload firmware to your ARMOR Z1.
Use this screen to backup and restore the configuration or reset the factory
defaults to your ARMOR Z1.
This screen allows you to reboot the ARMOR Z1 without turning the power
off.
This screen allows you to select the language you prefer.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet and HTTP/HTTPS to manage the ARMOR
Z1.
Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
Use this screen to view the list of activities recorded by your ARMOR Z1.
This screen allows you to select whether your device acts as a router, or an
access point.
ARMOR Z1 User's Guide
41