For Macintosh; For Windows - Panasonic PV-GS16 Operating Instructions Manual

• A message indicating a conflict between versions
may be displayed during the installation. This will not
cause a problem. Simply click [Yes] to proceed with
the installation.
Windows 98SE Users
The following messages may be displayed when
connecting this Camcorder and your personal
computer via USB Cable.
1) The message "MTDV98M3.pdr is not found"
is displayed.
• Enter "C:\Windows\system\IOSUBSYS".
2) The message "MTDV98M3.sys is not found"
is displayed.
• Enter "C:\Windows\SYSTEM32\DRIVERS".
• You may click [Browse] to look for and assign the
path.
Connecting the Personal Computer and
Camcorder
Please install the USB Driver first before
connecting the Camcorder to your Personal
Computer with the USB Cable.
Before making these connections, turn off all devices
which are to be connected.
• When using the USB Cable, use of the AC Adaptor
is recommended for the power supply of the
Camcorder.
For Using Built-in SD Drive
By connecting the Camcorder and Personal Computer
with the USB Cable, you can transfer still images
saved on a Memory Card directly to your Personal
Computer.

For Windows

1
Insert the Memory Card into the Camcorder.
2
Set the Camcorder to PC Mode.
3
Connect the Camcorder to your personal
computer with USB Cable.
• It enters PC Connecting Mode.
With a PC
4
Open [My Computer] and click [Removable
1
Disk] (For Windows 98SE/Me/2000
users).
Click [Open folder to view fi les using
Windows Explorer]
Windows XP users).
[Windows 98SE/Me/2000]
1
• You can view images stored on the Memory
Card and also save them to your hard disk.
• Please do not change file or folder names on the
Personal Computer. The images on the Memory
Card may not be able to be viewed on the
Camcorder.

For Macintosh

1
Insert the Memory Card into the Camcorder.
2
Set the Camcorder to PC Mode.
3
Connect the Camcorder to your Macintosh
with USB Cable.
4
Double click the "NO_NAME" icon.
• You can view images stored on the Memory
Card and also save them to your hard disk.
• Please do not change file or folder names on the
Personal Computer. The images on the Memory
Card may not be able to be viewed on the
Camcorder.
2
and then [OK] (For
[Windows XP]
2
45