Formatting A Card; Playing Back On Your Tv - Panasonic PV-GS16 Operating Instructions Manual

Digital video camcorder
Table of Contents

Advertisement

3
Press the [PHOTO SHOT] Button
35
• A verification message appears.
4
Select [YES] and press the [ENTER] Button
15
.
• The selected file is deleted from the Card.
• If [NO] is selected, the file selection is canceled.
To Select and Delete All Files
1
Set [PICTURE PLAYBACK MENU] >>
[DELETE] >> [ALL FILES] >> [YES].
13
14 15
16 17
• A verification message appears.
2
Select [YES] and press the [ENTER] Button
.
15
• All files of Picture Playback Mode are erased.
• A locked file cannot be erased.
• If there are many files on a card, it may take
longer to delete files.

Formatting a Card

If a Card becomes unreadable by the Camcorder,
format it for reuse. Formatting erases all the data
recorded on a Card.
1
Set [PICTURE PLAYBACK MENU] >>
[EDITING] >> [CARD FORMAT] >> [YES].
13
14 15
• A confirmation message appears, select [YES]
and formatting will be carried out.
• When the formatting is completed, the screen
becomes white.
40
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
19
19
16 17
Playback Mode
• It may not be able to use the Card formatted by this
.
35
Camcorder on another unit. In this case, format the
Card on the unit which will use the Card. Make sure
that valuable pictures are stored on your PC before
proceeding.
• A Card formatted on other equipment (e.g. PC)
might be unusable or it might take more time
for recording. We recommend that you use this
equipment to format the Card.

Playing Back on Your TV

By connecting your Camcorder with your TV, the
recorded scenes can be viewed on your TV screen.
• Before connecting them, turn off the power of both
the Camcorder and TV.
1
Connect the [AV OUT] Jack of the
Camcorder and the Video and Audio Input
Jacks of the TV.
• Connect to the TV with the AV Cable
• When plugging the pin plug of the AV cable into
the [AV OUT] Jack, plug it in as far as it goes.
To Make the Indications Appear on the
TV Screen
Press the [OSD] Button
(Optional).
• For other notes concerning this item, see page 59.
49
49
[VIDEO IN]
[AUDIO IN]
1
.
1
on the Remote Control

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents