Sennheiser SKM 300 G3 Instruction Manual page 29

Adjusting settings via the operating menu
Adjusting the contrast of the display panel –
"LCD Contrast"
You can adjust the contrast of the display panel in
16 steps.
Resetting the settings made in the operating menu –
"Reset"
Advanced Menu
Reset
Call up "Reset"
When resetting the settings made in the operating
menu, only the selected settings for the pilot tone
and for the frequency banks "U1" to "U6" remain
unchanged.
When the radio microphone is offline, i.e. when the RF
signal is deactivated (see page 13 and page 15), it
remains offline even after resetting the settings.
For an overview of the factory-preset default settings,
refer to the enclosed frequency information sheet.
Displaying the software revision – "Software Revision"
You can display the current software revision of the
radio microphone.
For information on software updates, visit the
SKM 300 G3 product page at www.sennheiser.com.
28 | SKM 300 G3
Reset
Yes
Select the desired
setting; apply the
setting
"Stored"