Sennheiser SKM 300 G3 Instruction Manual page 27

Adjusting settings via the operating menu
Mode
"AF On/Off"
"RF On/Off"
"Push To Mute"
"Push To Talk"
"Disabled"
*
If you select
permanently muted until you press
For information on how to use the
page 15.
Adjusting the backlighting of the MIC button –
"MIC LED"
Advanced Menu
MIC LED
LED On: Unmute
Call up "MIC LED"
Via the "MIC
backlighting of the
of the "Mute Mode" menu item and the status of the RF
signal or deactivate the backlighting.
Setting of the
MIC LED menu item Backlighting of the MIC button 3
LED On: Unmute
LED ON: Mute
Disable LED
Adjusting the transmission power – "RF Power"
Advanced Menu
RF Power
Standard
Call up
"RF Power"
Via the "RF
transmission power in two steps. It is vital to observe
the notes on the supplied frequency information sheet!
26 | SKM 300 G3
Function
If you press the
audio signal is muted.
If you press the
RF signal is deactivated.
The audio signal is muted as long
as you press the
*
The audio signal is activated as
long as you press the
No function
"Push To Talk", the radio microphone will be
MIC LED
LED On: Unmute
Select the desired
setting
"Stored"
LED" menu item, you can adjust the
MIC button
The MIC
when the radio microphone is
transmitting an RF signal or is
not muted.
The MIC
the radio microphone is
transmitting an RF signal or is
muted.
The backlighting of the
MIC button
RF Power
Standard
Select the desired
setting
"Stored"
Power" menu item, you can adjust the
MIC button, the
MIC button, the
MIC button.
MIC
theMIC button.
MIC button, refer to
MIC LED
LED On: Mute
Store the setting
3
based on the setting
3
button is backlit
3
button is backlit when
3
is deactivated.
RF Power
Store the setting
button.
not
Low