ENGLISH d) Do not abuse the cord. Never use the cord for carry- STEL815/STEL805/STEL816 ing, pulling or unplugging the power tool. Keep cord Angle Grinders away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric Technical Data shock.
enGliSH c) disconnect the plug from the power source and/or the f) The arbour size of wheels, flanges, backing pads or battery pack from the power tool before making any any other accessory must properly fit the spindle of adjustments, changing accessories, or storing power the power tool.
ENGLISH n) Regularly clean the power tool’s air vents. The motor’s e) Do not attach a saw chain woodcarving blade or fan will draw the dust inside the housing and excessive toothed saw blade. Such blades create frequent kickback accumulation of powdered metal may cause electrical and loss of control.
Page 6
Description (Fig. A) (fig. C4). Press in the spindle lock button (3) and rotate the spindle Your Stanley small angle grinder has been designed until it locks. Keeping the lock button pressed in, tighten for grinding, cutting, wire-cup brushing and sanding the threaded flange (6) with the spanner (15) provided applications.
Page 7
enGliSH To stop the tool, slide the switch backwards to the "OFF” Mounting and Removing the Rubber Backing Pad position. (fig. d & e) Always switch off the tool when work is finished and before The rubber-backing pad is available as an option. The guard unplugging.
Page 8
By using Stanley accessories will Your Stanley power tool has been designed to operate ensure that you get the very best from your Stanley tool. over a long period of time with a minimum of maintenance.