Turn And Lane-Change Signals; (Auto Signal) - Chevrolet Corvette Owner's Manual

•
Flash-to-Pass Feature. See Flash-to-Pass on
page 160.
I
•
Cruise Control. See Cruise Control on
page 162.
P
•
Exterior Lamps Control. See Exterior Lamps
on page 166.

Turn and Lane-Change Signals

(Auto Signal)

The turn signal has two upward (for right) and two
downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the multifunction lever all
the way up or down. When the turn is finished, the
lever will return automatically.
An arrow on the
instrument panel cluster
will flash in the
direction of the turn or
lane change.
I n f o r ma t i o n P r o v i d e d b y :
To signal a lane change, just raise or lower the
lever until the arrow starts to flash. Release
the lever and the turn signal will automatically flash
three times. If more flashes are desired, continue
to hold the lever.
If you signal a turn or a lane change and the
arrows flash faster than normal, a signal bulb may
be burned out.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when
you signal a turn, check the fuses and check
for burned-out bulbs. See Fuses and Circuit
Breakers on page 420.
Turn Signal on Chime
A chime will remind you if you leave the turn
signal on for more than three-quarters of a mile
(1.2 km) of driving.
If you need to leave the turn signal on for more
than three-quarters of a mile (1.2 km), turn off the
signal and then turn it back on.
159