...4 CONFIGURATION
4.6.1 Recording Channel Setup
Setup
None
Source ID
Red
Trace colour
•1 If this parameter is changed, a new internal data file for this recording channel is created. All historical data stored internally for this
channel is lost.
50
Select the signal source for the selected channel. This can be
•1
any external analog or digital signal. See APPENDIX 1 for full
list.
Note. The tabs change according to selection.
Setup
Analog i/p A1
Source ID Analog i/p A1
Setup
Comms Dig i/p 1
Source ID Comms Dig i/p 1
The trace color cannot be changed. The trace colors are:
1st
2nd
Magenta
Red
Alarm A
Alarm B
Totalizer
A – Analog Source
Totalizer
B – Digital Source
3rd
4th
5th
Black
Green
Blue
6th
Brown