Process View - ABB SM1000 User Manual

...2 OPERATION
2.6 Process View – Fig. 2.6
Note. This view is available only if the Totalizer option is fitted.
Totalizer not
enabled in
configuration level
Totalizer
Tag Name
Totalizer
Value
Selects the next Process Group
(if enabled) or the Status View
Selects the next enabled view
(Bargraph, Digital Indicator or Chart)
Notes.
• Only totalizers that have been enabled in the configuration level are displayed.
• When a totalizer is not running (i.e. Stop is selected), the corresponding totalizer value is shown
in red.
14
Alarm Tag
Process Group 1
Total Daily In Flow
0005402801
litres
Total Daily Out Flow
0005402060
litres
Opens the Operator Menu for
the current view
A – Process View (Alarms)
Total Daily In Flow
0005402801
litres
Values since last totalizer reset or totalizer wrap. Calculated only while
the totalizer is enabled. Updated only while the totalizer is running.
B – Process View (Statistics)
Fig. 2.6 Process View
Alarm Trip Level
Tank 1 Low Level
1.25
Tank 1 High Level 4.75
Tank 1 Low Pressure
0.25
Tank 1 High Pressure
4.75
Low In Flow Rate
40
High In Flow Rate
280
High Out Flow Rate 250
Tank 1 Low Temp
150
Tank 1 High Temp
200
Channel Source Long Tag
Storage Tank 1 In Flow
225.4 110.9 201.0
Max Min Average
Alarm Acknowledged
28/03/00
Short Channel Tag
14:52:00
Level
Instantaneous Value
2.08
metres
Alarm Status
Pressure
4
bar
In Flow
204.9
l/hr
Out Flow
198.9
l/hr
Temp
195
°C
Alarm 1
On
In Flow
204.9
l/hr