4.5 Process Group Configuration
Common
Group 1
Channels 1.1 - 1.6
Group 2
Channels 2.1 - 2.6
Functions
I/O Modules
Exit
Note. If only one Process Group has been selected in the common configuration setup, only one Process Group is
displayed in the configuration menu.
4.5.1 Setting the Recording Parameters
Recording
Chart
Bar
Process
20 Characters
Tag
None
Recording enable source
Process Group 1
or
Process Group 2
Fig. 4.9 Selecting Process Group Configuration
Digital
Archive
Group Configuration
Recording
Chart
Bar
Process
20 Characters
Tag
On, Off
Recording enable source
MM:SS
Primary sample rate
MM:SS
Secondary sample rate
None
Sample rate select source
Enter the Process Group tag that appears in the title bar
when any operator views from that group are displayed.
Set the edge-triggered digital source (e.g. Alarm Signal,
Real-time Event) used to enable/disable recording of all
channels in the group.
Enabled
4 CONFIGURATION...
Digital
Archive
Disabled
39