ABB SM1000 User Manual page 33

...4.1.2 Configuration Access – Figs. 4.1 and 4.2
Configuration
Operator 1
Use the up and down keys to select your password.
Confirm with Enter key
0000
Operator 1
Edit Current Configuration
Open a Configuration
New Configuration
Cancel
Disable recording in configuration
Check this box to stop
Cancel and return to the
recording while in the
operator level
configuration mode
Use to highlight
a different selection.
Use to accept the
selection
Note. If New Configuration or Open a Configuration is selected and the modified configuration file is later saved as the
current configuration, new internal data files for all enabled recording channels are created and any unarchived data is lost.
Operator 1
Operator 2
Operator 3
Operator 4
Displayed only if 'Configuration Security'
parameter is set to 'Password Protected'
– see Section 4.4.2
Edit the currently active configuration.
Changes are not implemented until saved
on exit from the configuration level
Internal Storage
QSRTD_F
QSRTD_C
QSTHC_F
QSTHC_C
QSFlow
QSMilliamp
QSDemo
Company standard
SM2000
QSDairy
External Storage
Open a configuration previously saved
to internal or external archive storage
media (up to 16 configurations can be
stored in internal memory). Alternatively,
open one of the QuickStart templates –
see APPENDIX 4.
Open a new configuration with the default
settings detailed in APPENDIX 4
Fig. 4.2 Accessing the Configuration Level
4 CONFIGURATION...
Use the key to
switch between internal
and external storage.
Press to cancel.
Common
Group 1
Channels 1.1 - 1.6
Group 2
Channels 2.1 - 2.6
Functions
I/O Modules
Exit
31