Card Mode; Using A Card - Panasonic NV-DS60 Operating Instructions Manual

3
2
1
1
4
PLEASE WAIT
38

Using a Card

A Card can be used to record still pictures.
≥Use genuine card only.
≥When setting an M-CARD Mode, the DV Output will not
function.
ª Inserting a Card
Before inserting a Card, be sure to turn off the Movie Camera.
1
Open the Card Slot Cover.
3 2
Insert the Card in the direction as shown in the
illustration
3
Close the Card Slot Cover securely.
2
Removing the Card
Open the Card Slot Cover and press the centre of the Card and
then pull it straight out.
≥After removing the Card, close the Card Slot Cover.
≥The SD Memory Card has a write protection switch on it.
the switch is moved to the [LOCK] side, you cannot write to or
format the Card. If it is moved back, you can.
ª [ACCESS] Lamp 3
ACCESS Lamp is available only when the Card Slot Cover is
opened.
While the Movie Camera is making an access to the Card
(reading, recording, playback, erasing, moving of images), the
[ACCESS] Lamp lights up and the [PLEASE WAIT] Indication
appears.
≥While the [ACCESS] Lamp is on, never attempt to pull out the
Card or to turn off the Movie Camera. Such actions will
damage the Card, cause loss of recorded data and cause the
Movie Camera to malfunction.

CARD Mode

1
.
2
If
4