Panasonic NV-DS60 Operating Instructions Manual page 29

1
PUSH
2, 3, 4
WIPE
WIPE
WIPE
MIX
MIX
MIX
1
2, 3
M-DEL
STILL/
P-IN-P
4
PHOTO
SHOT
4
P-IN-P
ª Wipe Mode and Mix Mode
Wipe Mode:
Like a curtain is being pulled, the still picture of the last recorded
scene gradually changes to the moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the still image
of the last recorded scene gradually fades out.
1
Set [DIGITAL EFFECT] >> [EFFECT] >> [WIPE] or
[MIX].
≥The [WIPE] or [MIX] Indication appears.
2
Press the Recording Start/Stop Button to start
recording.
3
Press the Recording Start/Stop Button to pause
the recording.
≥The last scene is stored in memory. The [WIPE] or [MIX]
Indication changes to [B] or [C].
4
Press the Recording Start/Stop Button to restart
the recording.
≥The last image of the previous scene gradually changes to
the new scene.
ª Picture-in-Picture Mode
PUSH
You can display a sub-screen (still picture) inside the screen.
1
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT]
>> [EFFECT] >> [P-IN-P].
2
Aim the Movie Camera at the scene you want to
capture and press the [STILL] Button.
3
Press the [P-IN-P] Button.
≥A small still picture is displayed in a Normal picture.
≥If the [STILL] Button is pressed again, the small still picture
is cleared.
4
Press the Recording Start/Stop Button or the
[PHOTO SHOT] Button to record on the Cassette.
≥If you turn off the Movie Camera power, Digital Effect
Functions are atuomatically cancelled.
≥For other notes concerning this item, see page 48.
29