[Cust.set Mem.]; [Lcd Mode]; [Guide Line]; [Histogram] - Panasonic LUMIX DMC-TZ18 Owner's Manual

Using the [Setup] menu
Item

[Cust.Set Mem.]

Register settings on
current camera. (→51)

[LCD Mode]

Make LCD monitor easier
to see.

[Guide Line]

Select recording
information display and
types of guidelines. (→39)

[Histogram]

Check subject brightness
on graph. (→39)
20
VQT3H43
[C1] / [C2] / [C3]
[Auto Power LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[Power LCD]:
Makes screen brighter than normal (for outdoor use).
[High Angle]:
Makes screen easier to see when taking pictures from
high positions. (becomes harder to see from the front)
[OFF]
• [Auto Power LCD] does not work in Playback Mode.
• [Power LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any
button to make brighter again).
• [High Angle] will be canceled when power is turned off.
• Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different
than their actual appearance, but this will not affect the
recorded picture.
• Setting [LCD Mode] will reduce the number of pictures
that can be recorded and recording time.
[Rec. Info.]
[ON] (Display recording information with guide lines.)
[OFF]
[Pattern]
/ : Change the patterns of guide lines.
[ON]/[OFF]
(Continued)
Settings, notes