Copying still pictures and motion pictures
Getting Ready:
• Charge the battery sufficiently. Or, connect the AC adaptor (optional) and DC coupler
(optional).
• Insert the card and turn on power. When importing pictures from the built-in memory,
remove any memory cards.
[Access] (sending data)
• Do not disconnect the USB connection
cable while [Access] is displayed.
Turn on power of both
camera and computer
Connect camera to
computer
• Please make sure you use the
supplied USB connection cable.
Use of cables other than the
supplied USB connection cable
may cause malfunction.
■
To cancel connection
Click "Safely Remove Hardware" in the Windows System Tray
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
USB connection cable
(always use cable supplied)
Select [PC] on the camera
A message may be displayed on
screen if [USB Mode] (→22) is set to
[PictBridge(PTP)]. Select [Cancel] to close
the screen, and set [USB Mode] to [PC].
Operate with your
computer
103
VQT3H43