Setting The Clock - Panasonic LUMIX DMC-TZ18 Owner's Manual

Setting the clock

Set REC/PLAY switch to
REC/PLAY
switch
To change time setting
Select [Clock Set] from the
[Setup] menu, perform
.
• Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in the camera for 24
hours beforehand.
●
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures at a digital photo center or when using [Date Stamp] or [Text Stamp].
●
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
16
VQT3H43
before turning on the power.
[MENU/SET]
and
( The clock is not set when the
camera is shipped.)
Turn on the power
The power is turned on.
If the language select screen is not displayed,
proceed to step
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
The [Please set the clock] message appears.
(This message does not appear in Playback
Mode.)
Press [MENU/SET]
Press ◄► to select the items
(year, month, day, hour, minute,
display order or time display
format), and press ▲▼ to set
Select either [24hrs] or [AM/PM] for the
time display format.
Select the display order for the day, month, and
year ([M/D/Y], [D/M/Y], or [Y/M/D]).
• To cancel → Press [
Press [MENU/SET]
Confirm the setting and press
[MENU/SET]
Turn on the power again and check the time
display. (Time and date can be displayed by
pressing [DISP.] several times.)
.
/ ].