Printing
You can connect directly to a PictBridge-
compatible printer for printing.
Getting Ready:
• Charge the battery sufficiently. Or, connect
the AC adaptor (optional) and DC coupler
(optional).
• Insert the card and turn on power. When
copying pictures from the built-in memory,
remove any memory cards.
• Adjust the print quality or other settings on
your printer, as needed.
• Do not disconnect the USB connection cable
when the cable disconnection icon
(displayed with some printers).
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
■
To cancel print
●
Do not use any other USB connection cables except the supplied one.
●
Disconnect USB connection cable after printing.
●
Turn off power before inserting or removing memory cards.
●
When the battery begins to run out during communication, a warning beep sounds.
Cancel printing and disconnect USB connection cable (recharge the battery before
reconnecting).
106
VQT3H43
is displayed
USB connection cable
(always use cable supplied)
Press [MENU/SET].
Turn on power of camera
and printer
Connect camera to
printer
• Make sure you use the supplied
USB connection cable. Use of
cables other than the supplied
USB connection cable may cause
malfunction.
Select [PictBridge(PTP)]
on the camera
When [Connecting to PC...] is
displayed, cancel the connection and
set [USB Mode] (→22) to either [Select
on connection] or
[PictBridge(PTP)].
Press ◄► to select a
picture to print and press
[MENU/SET]
Select [Print start]
• Print settings (→108)