Lenovo System x3550 M4 Installation And Service Manual page 76

Hide thumbs Also See for System x3550 M4:

Table of Contents

Figure 48. RAID adapter battery or flash power module cable connection

Attention: Make sure that the cable is not pinched and does not cover any connectors or obstruct

any components on the system board.

Remove any cable covering or obstructing the battery holder before opening the battery holder.

Install the battery or flash power module:

Release the retention clip in the open position.

Align the cable connector with the slot on the holder. Place the battery or flash power module

into the holder and make sure that the holder engages the battery or flash power module

System x3550 M4 Installation and Service Guide

Troubleshooting