Installation; Installing Hd Writer Ver1.0E For Sd1 - Panasonic HDC-SD1PP Operating Instructions Manual

Installation

When installing the software, log on to your
computer as the Administrator or with a user
name with equivalent authorization. (If you do not
have authorization to do this, consult your
manager.)
≥Before starting the installation, close any other
software applications which are running.
≥Do not perform any other operations on your
computer while the software is being installed.
Installing HD Writer Ver1.0E for
SD1
1
Insert the CD-ROM into the
computer.
The [Setup Menu] screen will appear.
≥If the [Setup Menu] screen does not
appear, double-click the CD-ROM drive
icon in [My Computer].
2
Click [HD Writer Ver1.0E for
SD1].
≥The software application may not run
properly if you cancel the installation at any
point e.g. by pressing [Cancel].
≥Microsoft DirectX 9.0c must be installed in
order to operate the HD Writer Ver1.0E for
SD1. (l 93)
If you install the software on a computer
that is not compatible with DirectX 9.0c, the
computer may not work properly. If you are
unsure whether or not your computer is
compatible, contact the maker of your
computer.
3
Click [Next].
4
Read carefully through the [End
User License Agreement], then
place a check beside [I accept
the terms of the license
agreement] if you agree to them
and click [Next].
≥If you do not agree to the terms and
conditions of the License Agreement,
installation is not possible.
≥Continue to follow the on-screen messages
to install it.
5
After the installation is complete, restrictions
are displayed.
Check the contents, then click [
on the top right of the window.
With a computer
]
t
97
VQT1A24