Table of Contents
Advertisement
SATA Mode Selection
This item allows you to set the SATA configuration.
[AHCI]
[RAID]
S.M.A.R.T. Status Check
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks.
Configuration options: [On] [Off]
SATA6G_1(Gray) - SATA6G_10(Black)
This item allows you to enable or disable the selected SATA port.
Configuration options: [Disabled] [Enabled]
Hot Plug
These items appears only when the SATA Mode Selection is set to [AHCI] and allows you to
enable or disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3-22
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
Set to [RAID] when you want to create a RAID configuration from the
SATA hard disk drives.
Chapter 3: BIOS Setup
Hide quick links:
Advertisement
Table of Contents
