Dram Frequency - Asus X99-A II User Manual

BCLK Frequency
This item allows you to set the BCLK (base clock) frequency to enhance the system
performance. Use the <+> or <-> to adjust the value. The values range from 80.0 MHz
to 300.0 MHz.
We recommend you to set the value based on the CPU specification, as high BCLK
frequencies may damage the CPU permanently.
ASUS MultiCore Enhancement
[Auto]
[Disabled]
CPU Core Ratio
This item allows you to set the CPU core ratio limit per core or synchronize automatically to
all cores.
Configuration options: [Auto] [Sync All Cores] [Per Core]
BCLK Frequency: DRAM Frequency Ratio
This item allows you to set the base clock frequency of the DRAM frequency ratio.
[Auto]
[100:100]
[100:133]

DRAM Frequency

This item allows you to set the memory operating frequency. The configurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Configuration options: [Auto] [DDR4-800MHz] [DDR4-4000MHz]
TPU
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance.
[Keep Current Settings] Keep the current settings without changing anything.
[TPU I]
[TPU II]
Ensure to use water cooling device before selecting [TPU II].
3-16
This item allows you to maximize the oveclocking performance optimized
by ASUS core ratio settings.
This item allows you to set to default core ratio settings.
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually
assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
The DRAM ratio is set to its optimized settings.
The DRAM ratio is set to 100:100.
The DRAM ratio is set to 100:133.
Applies air cooling overclocking conditions.
Applies water cooling overclocking conditions.
Chapter 3: BIOS Setup