Configuring Ip Address - Planet WGSD-10020 Series Quick Installation Manual

5. Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
 Show the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address as shown in Figure 5-1.
 Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 5-2.
WGSD-10020HP# configure terminal
WGSD-10020HP(config)# interface vlan 1
WGSD-10020HP(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
Figure 5-1: IP Information Screen
7