Table of Contents
Advertisement
Indoor Pan/Tilt Head AW-PH400
Specifications
Supply voltage:
Power consumption: 145 W
1 indicates safety information.
Genlock input:
Prompter input
(PROMPTER IN):
Prompter output
(PROMPTER OUT):
Camera video output
VIDEO:
Y:
Pr/C:
Pb:
SDI:
Camera, pan/tilt head control:
RP/IP
Functions/performance:
Ambient operating temperature: 32°F to 113°F (0°C to +45°C)
Storage temperature:
Ambient operating humidity:
Dimensions (W!H!D):
Weight:
Finish:
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
AC 120 V, 60 Hz
BNC
Black burst or composite video signal
BNC
Through output to PROMPTER connector
D-SUB 15-pin
BNC, 75-ohm output
BNC, 75-ohm output
BNC, 75-ohm output
BNC, 75-ohm output
BNC
RJ45, RS-485, pan/tilt head control signal output
Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
max. 500 meters
Maximum load-bearing capacity: 17.6 lbs (8 kg)
Tilt range: 300 degrees (approx. ±150 degrees)
The tilt range is limited to 190 degrees by the initial setting of the AW-RP400. To move
beyond 190 degrees, change the AW-RP400 setting.
The tilt range is subject to restrictions depending on the cable and lens of camera to be
mounted on pan/tilt head.
Pan range: 400 degrees (approx. ±200 degrees)
Maximum operating speed: 90 degrees/sec.
(Maximum operating speed with prompter mounted: 30 degrees/sec.)
Repeatability: ±30"
Noise level: Less than NC30 (at less than 30 degrees/sec.)
–4°F to 140°F (–20°C to +60°C)
30% to 90% (no condensation)
12-3/8"!21"!7-3/8" (315!534!188 mm)
Approx. 22.5 lbs (10.2 kg)
AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)
20
Advertisement
Table of Contents
