Position Your Router; Connect Your Router - TP-Link TL-WR843N User Manual

Chapter 2
2. 1.

Position Your Router

• The router should not be located where it will be exposed to moisture or excessive
heat.
• Place the router in a location where it can be connected to devices as well as to a
power source.
• Make sure the cables and power cord are safely placed out of the way so that they do
not create a tripping hazard.
• The router can be placed on a shelf or desktop.
• Keep the router away from the strong electromagnetic radiation and the device of
electromagnetic sensitive.
2. 2.

Connect Your Router

There are three operation modes supported by this router: WISP Client Router, Standard
Wireless Router and Repeater. Please determine the operation mode you need and
carry out the corresponding steps.
WISP Client Router Mode
In WISP Client Router mode, the router enables multiple users to share Internet
connection from WISP.
1. Connect the power adapter to your router and plug the power adapter into an outlet,
and then press the
2. Connect your device to the router wirelessly or via an Ethernet cable. The Wi-Fi
network name and password are on the router's label.
When the router is installed in a location far from a power outlet, power the router with
the included passive PoE injector.
ON/OFF POWER INTERNET 1
ON/OFF button to turn on the router.
WPS/
2 3 4 ROUTER WISP RESET
LAN (1/2/3/4)
Connect the Hardware
or
6