TP-Link TL-WR843N User Manual page 70

Chapter 4
• Clear Log - All the logs will be deleted from the router permanently, not just from the
page.
Click Next to go to the next page, or click
4. 16. 9. Statistics
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
total traffic and the value of the last Packet Statistic Interval in seconds.
• Current Statistics Status
click the Enable button. If disabled, the function of DoS protection in Security settings
will disabled.
• Packets Statistics Interval (5-60)
60 in the drop-down list. The Packets Statistic Interval indicates the time section of
the packets statistic.
• Sorted Rules – Choose how displayed statistics are sorted.
• Select Auto-refresh
• Click Reset All to reset the values of all the entries to zero.
• Click Delete All to delete all entries in the table.
Statistics Table
IP/MAC Address The IP and MAC address are displayed with related statistics.
Packets The total number of packets received and transmitted by the router.
Total
Bytes The total number of bytes received and transmitted by the router.
Previous
> Statistics, and you can view the statistics of the router, including
- Enable or Disable. The default value is disabled. To enable,
- The default value is 10. Select a value between 5 and
to refresh automatically. Click
Configure the Router in WISP Client Router Mode
to return to the previous page.
Refresh to refresh immediately.
67