Wireless - TP-Link TL-WR843N User Manual

Chapter 5
5. 5.

Wireless

5. 5. 1. Wireless Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Wireless > Wireless
3. Configure the basic settings for the wireless network and click Save.
• Wireless Network Name
TP-LINK_XXXX (XXXX indicates the last unique four numbers of each Router's MAC
address). It is strongly recommended that you change your network name (SSID). This
value is case-sensitive. For example, TEST is NOT the same as test.
• Mode - Select the desired mode. It is strongly recommended that you keep the default
setting 11bgn mixed, so that all of 802.11b/g/n wireless stations can connect to the
router.
Note:
If 11bg mixed mode is selected, the
be changed.
• Channel Width - Select any channel width from the drop-down list. The default setting
is Auto, which can automatically adjust the channel width for your clients.
• Channel - This field determines which operating frequency will be used. The default
channel is set to Auto. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
• Enable Wireless Router Radio
disabled to allow or deny wireless access. If enabled, the wireless clients will be able
to access the router.
Settings.
- Enter a string of up to 32 characters. The default SSID is
Channel Width field will turn gray and the value will become 20M, and cannot
- The wireless radio of the router can be enabled or
Configure the Router in Standard Wireless Router Mode
82