Panasonic AJ-SD93 Operating Instructions Manual page 29

Setup menus (continued)
USER menu <VIDEO>
No./Item
623
For setting 7.5% setup processing
to be performed on input and output
SETUP 50
signals in the DVCPRO50 (50 Mbps)
(For AJ-SD93P)
mode.
When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
Sub-screen
00 This selects the 7.5% setup processing
for the input composite signal.
CMPST IN
0000 THRU :
The signal is recorded in its original
form.
0001
The signal is recorded with the
7.5% setup removed.
YA93P
01
This selects the 7.5% setup processing
for the output composite signal.
CMPST OUT
0000 THRU :
The signal is output in its original
form.
0001
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 623 (SETUP 50).
02
This selects the 7.5% setup processing
for the input component signal.
CMPNT IN
0000 THRU :
The signal is recorded in its original
form.
0001
YA93P
The signal is recorded with the
7.5% setup removed.
YA94G
03
This selects the 7.5% setup processing
for the output composite, component
CMPNT OUT
and serial (digital) signal.
0000 THRU :
The signal is output in its original
form.
0001
The signal is output with the 7.5%
setup removed.
0002
YA93P
The signal is output with the 7.5%
setup added.
YA94G
The underlined items indicates the initial setting.
This appears only when the optional board
YA93P
AJ-YA93P has been installed.
This appears only when the optional board
YA94G
AJ-YA94G has been installed.
Description
CUT :
ADD :
CUT :
CUT :
ADD :
No./Item
624
For selecting whether to record the
closed caption signals multiplexed
CC REC
on the input signals on the tape.
(For AJ-SD93P)
0000 OFF :
0001
Note:
If 1394 signals have been selected as
the input signals using the INPUT
SELECT button, the closed caption
signals which have been multiplexed
YA93P
onto the input signals will be recorded
on the tape regardless of the setting.
YA94G
645
This selects whether or not to record
the wide-screen information on the tape.
WIDE
SELECT
0001
0002
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, the wide-screen information on
the input signals will be recorded
regardless of this menu's setting.
660
This selects whether or not to
record the UMID information on the
UMID REC
tape.
0000
0001
Note:
If 1394 has been selected as the input
signals using the INPUT SELECT
button, UMID will not be recorded even
when it is set to ON unless the input
signal can be detected.
– 29 –
Description
No closed caption signal is recorded.
ON :
When a closed caption signal is
detected from the selected input
signal, it can be recorded.
WIDE :
The wide-screen information is not
recorded on the tape.
NORMAL :
The wide-screen information is
recorded on the tape.
OFF :
UMID information is not recorded on
the tape.
ON :
UMID information is recorded on the
tape.